FAQS
Frequently asked questions for PCC Fluid Fittings.We are all consolidated under PCC Fluid Fittings.
Yes. Designed Metal Connections, Inc. (DMC) and Permaswage, SA (PSA) have consolidated the two brand identities under Permaswage to establish a presence as "One business-Two sites” in the marketplace. The businesses are now Permaswage USA, Permaswage Europe and Permaswage China, respectively.
Please reach out to PWUSCustomerService@pccairframe.com
Cage Code:
- Permaswage 14798
- Nelson 52930
- Airdrome 01673
- Faber 14397
For Further Information that needs special attention regarding technical issues please contact us via email: g_PWUSTechSupport@pccairframe.com
No, we will continue to identify ourselves using the legal entity names (i.e., Designed Metal Connections, Inc., dba Permaswage USA).
Please reach out to PWUSCustomerService@pccairframe.com and include the order information. Your order administrator will respond to your request in a timely manner.
Please reach out to PWUSCustomerService@pccairframe.com and include the order information. Your order administrator will respond to your request in a timely manner.
If you are not a direct sales customer of PCC Fluid Fittings in Gardena, CA, please contact your preferred distributor. Our authorized distributor list is located here.
SOP6-01-05
SOP6-01-10
SOP604
SOP604-013
SOP604-017
SOP6-00-10
SOP604-005
SOP604-015
SOP604-021
SOP604-022
SOP604-025
SOP604-029
SOP604-028
SOP604-008
SOP604-033
SOP 604-030
AS4459, AS18280
Please refer to our Documents page for certification information
Yes, please contact us at g_pwustechsupoport@pccairframe.com
Temperature range -50F to 275F
Yes, for further information on specific material please submit an inquiry on our contact us page.
PCC Fluid Fittings are compatible with 316 SS tubing and require dedicated tooling.
Yes. Please contact PCC Fluid Fittings directly for further inquiries.
Please refer to our services page for further inquiries.
Please refer to our services page for further inquiries located on our main menu.
Please refer to SOP 604-030.
Please contact our authorized distributors for spares inquiries.
PCC no longer manufactures spare parts for the obsolete D12000 series tooling. Please contact us to upgrade to the current DLT series tooling.
Yes, please contact us at g_PWUStechsupport@pccairframe.com for further inquiries.
We do not recommend swaging painted tubing with any of our fittings. The paint may be damaged due to the swage and it may act like a stress riser and lead to fretting tube failure.
MIL-H-5606 or (MIL- PRF-83282)
There should not be leaking at the relief valve. It may be stripped and need repair.
Operation of the pump should be 10,000 psi (+/- 250 psi). Any pressure less than 10,000 psi is not acceptable.
Predominately used on hydraulic applications, DME is well suited for any systems that fall within the operating pressure, temperature ranges, and compatible tubing alloys/wall thicknesses called out in the SOP604-013.
Tooling would be the same.
Since the majority of installations of DME are bench/production, there should be no installation access issues with DME tooling. Also, there should be no issues with tools as they relate to tubing design other than minimum straight length to bend.
DME30 is made from a material that is not listed in AS18280; therefore, it does not fall under the full scope of AS18280. On the other hand, it is not an industry standard to be part of any QPL.
DME30 is interchangeable functionally with both fittings, but the dimensions of three fittings are different. Their dimensions cannot be compared because NAS1760 is a machined end, and MS21922 and DME30 require special assembly procedure or swaging. However, the tube stick-out of both MS21922 and DME30 (when using the proper dies) returns the same distance from the gage dimension on the fitting to the end of tubing, and it provides the same assembly without changing the overall tube length.
It is Teflon-based PTFE paint that is used mainly for identification and to direct the user in the proper installation of the tooling for swaging.
Yes.
ARP908 is for hose and tube fittings; however, it specifies that if any component of the joint is aluminum, the values for aluminum fitting Material II shall apply.
No.
A DLT power unit is a hydraulic cylinder that converts the pump pressure into the swaging force of the head assembly. The power unit consists of various components, including a piston, springs, and hydraulic seals.
The head assembly consists of a lower die block, yoke, end plates, and swage dies. The head assembly is available in graduated sizes for the different sizes of fittings of the power unit model, as applicable.
Permaswage offers pneumatic, electric, and manual.
The deburring tools are equipped with size-dependent, removable stem assemblies for the various tube sizes. Each tool has an expandable rubber plug to fit a range of tubing walls. The plug prevents metal chips from contaminating tubing systems during the deburring process. These tools are included in kits with units up to model 40.
The tube cutters are equipped with a ratcheting handle, making it possible to cut a tube when space limitations make it impossible to move the handle through a wide arc. Tube cutters range in size from 3/16” to 1-1/2".
Tube installation marking templates are used to establish the proper installation depths.
After-swage inspection gages are used to verify that the proper amount of swage was achieved.
Please contact us with further questions at g_PWUStechnicalsupport@pccairframe.com
Connections may be swaged up to 3x Max. Please refer to technical manual SOP-601-05 for more information.